Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

10.06.2025 23:44

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

For this case there are devices called Metal oxide varistors (MOV).

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

Thoughts on an 8-1 Rangers win - Lone Star Ball

What does a fuse do?

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

the problem then depends on "how fast does the fuse operate?".

Gold Climbs as Rising Geopolitical and Trade Tensions Aid Havens - Bloomberg.com

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

Barnstars:

Here is a simplified AC power diagram.

Are there any Indian wife swapping stories?

Because the load is inductive, the current lags the voltage.(by a bit).

This is where the MOV conducts again, and dissipated the energy.

This is where this question deviates from being a 'generic' question, and becomes more specific.

What’s the worst thing you caught anyone in your family doing?

but this device (an Inductor) … impedes the rapid changes in the current.

In schematic diagrams this is the symbol for a fuse:

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

S&P 500 Nuclear Stocks Receive Price Target Hikes Following 20-Year Meta Deal - Investor's Business Daily

There are two important concepts here.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

How can I watch porn on TikTok?

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

but I think this circuit , shows a few more pieces.

A circuit breaker is similar, but is resettable.

Physicists force atoms into state of quantum 'hyper-entanglement' using tweezers made of laser light - Live Science

Upvotes:

A fuse is a non-resetable over current circuit protector.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

Report: Patriots have no plans to release Stefon Diggs - NBC Sports

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

One

How was your JEE 2024 result like?

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

What is lightning?

But… the neutral is now “floating” because of the 1 ohm resistance.

This Type of Fiber Could Have Weight Loss Benefits Similar to Ozempic - ScienceAlert

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

He then describes Rainy Season and Lightning.

nine

The MOV will conduct when the voltage exceeds 50% of line voltage.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

These devices are installed between the “hot” and “neutral” and protective ground.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

eight

So, the voltage could go up to 500 volts, and the fuse will not open up.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

First Sentence:

2024–10–10[John johnson John Johnson ]

This one hit behind the barn.

These are simplified answers to the original question, and does not change anything I wrote above.

a photo is worth a thousand words.

There are three different concepts here that are getting confused.

This is 'the assistant's answer'

Can the fuse protect the electronic devices from lightning instead of a surge protector.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

An AC voltage/ current source, and an ac inductive load.

(Dc diagram shown, AC is similar).

This device then solves the entire problem.

2024–10–14 [Omar Gharbi Omar Gharbi ]

At one ohm, the resistor has a maximum of 1 watt power.

so, what happens?

He then describes the function of a fuse.

The third is lightning and “how it gets conducted into a home.”

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

The bolt then partially travels down the line to your home.

[old diagram got deleted by accident]

But it can get overloaded, and no longer works.

He then asserts :

It also is a device that limits the change in current flow.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

Edit 2024–10.

The other is “what does a “fuse” do?”

One is “what exactly is in a ‘surge protector’ ? ”

[image of Common-mode choke]

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

what exactly is a ‘surge’ protector?

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

This is the picture of an electronic coil of wire wound around a core of magnetic material.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

It seems Mohan does not understand the difference between a comment and an Answer.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

2024–10–16 [ OO OLAOYE OYEBODE ]

At least they know the answer if they wanted it.

Now when you have a certain ac resistance, then a current flows in a loop.

I post the exact comment here.